Spray polyurethane roof contractor NE Wisconsin

Spray Polyrethane Foam Roofing Contractors in the Green Bay Area

SPF is a polyurethane foam that is applied by spraying directly onto an existing roof surface. The liquid concoction turns to foam as it is applied and forms a UV protective coating that’s typically at least 1” thick. There are no seams or air gaps between the coating and the roof. This provides excellent thermal insulation, as well as resistance to water ponding. SPF roofing is widely used on the roofs of commercial and industrial buildings. While installation of an SPF roof is extremely easy compared to other roofing systems, the materials cost more. With the money saved on installation costs, an SPF roof will generally cost less than other roofing systems, and you have a roof that is highly unlikely to give you any water leak headaches.

Green Bay Roofing>Green Bay Commercial Roofers>Spray Polyurethane Foam Roofing

SPF Installation and Repair

If the protective coating is worn off before it gets recoated, the entire sprayed-on roof may need to be torn off. With a minimal amount of care and attention to recoating, an SPF roof can easily last 50 years or more.

If Spray Polyurethane Foam roofing sounds good to you, get in touch with Green Bay roofing contractors at Overhead Solutions for a free estimate. SPF roofs for businesses have been installed and maintained all over northeast Wisconsin, from Sturgeon Bay in Door County to Oshkosh in the Fox Valley.

Get a free quote

Emergency Roofing Services

Overhead Solutions offers a 24/7 damage control hotline for all customers. You can call at any time and there will be someone right there to assist with your roofing issues.

Benefits of Spray Polyurethane Roofing

Spray polyurethane roofing can be used on flat roof residential and commercial properties. There are many benefits associated with it, including:

Can last up to 50 years or more
Easy maintenance
Quick installation
Seamless

Spray polyurethane roofing has the highest R-value of any commonly used roofing. R-values refer to the capacity of an insulating material to resist heat flow. If the R-value is higher, there will be less hot and cold air allowed to pass through the roof. This helps to lower energy costs, saving you money on your energy bill.

There is little to no tear-off involved in the installation of these roofing systems. When properly maintained, they will not require recoating for 10 to 20 years after installation. To renew your roofing system, you will need to recoat it to ensure there is still the correct amount of U.V. Protection.

Get a free quote